A new version of Symatavision is being released and it is considered as a timing analysis solution which is for embedded software’s and it is designed specially by keeping in mind the time-critical ventures.

The CEO of Luxoft said “Symtavision 4.0 has a new analysis option at a functional level as well as updated features for the analysis of Ethernet networks. Both new features will significantly improve timing analysis of automotive control units, networks and distributed systems in general, the vendor promises.”

Moreover, it includes a new visualization capability in its SymTA/S toolset which is for data flow. Which is ideal for a fast running software. Apart from that, it has numerous filters which are designed so the software could work efficiently.

The CEO added “Symtavision 4.0 also includes extensions to the Ethernet network timing analyses in SymTA/S. Buffer occupancy in Ethernet switches can now be undertaken at the buffer level, allowing the validation of switch memory and thereby reducing the risk of dropped frames due to buffer overflows. This is supported by both simulation (system distribution) analysis and worst-case analysis. The addition of end-to-end jitter metrics provide an early hint as to the real-time capability of individual messages and helps to identify potential data losses at the receiver. Worst-case latency analysis has also been extended to cover Ethernet AVB and support is now provided for Autosar 4.2 Ethernet models, including SOME/IP. For CAN networks, a new dashboard is available that provides a quick overview of the status of a network.To support the automated testing of automotive ECUs and networks (CAN, FlexRay, Ethernet), both the SymTA/S TraceAnalyzer tools in Symtavision 4.0 offer the advanced comparison of actual versus target behavior, facilitating fast verification of measurements against the expected behavior from the model.”

So basically it is an outstanding innovation in the field of networking and its design is simply phenomenal.
Read More

Broadband is making a comeback said CEO of Adtran

In the ever-growing field of telecommunication and networking, it’s hard to come up with the developing technologies. You have to work hard to stay in the race. The CEO of Adtran is very optimistic about the hardcore comeback of broadband in the market. In an interview, Tom Stanton said: “Broadband is getting hot again, and it’s going to be made even hotter by the advent of 5G wireless and actually made easier to deploy by the arrival of virtualization.”

In annual briefing event of Adtran in Huntsville Stanton was of the view that with the immense increase in the access speed it will create more and more and more opportunities for the clients to access the internet at really high speed. He further added, “the arrival of 5G and millimeter wave technology will push the industry toward wireless as the final connection, but all of that traffic will mostly be riding fiber or souped-up copper through the network.”

“If you are going to run a network that’s got billions of different end connections instead of tens of millions, fundamentally you have to do things differently. Companies such as Amazon Web Services Inc. and Google have figured out how to handle billions of users and you are seeing the carriers follow through that same thought process.”

So bottom line, to prosper you have to adapt to the ever-changing tech environment. So to bring back the broadband boom Stanton can use the same software he develops to support any physical access technology rather than working separately on each network element.

Read More

How to Make Category5/Cat5e 350 MHz or Category6/Cat6 550 MHz Patch Cable

Before we start making a cat5e/Cat6 patch cable, need to cut a standard length of Cat5e/Cat6 cable. After cutting the length you should make sure to measurement. Nothing is worse than the patch cable you just built being an inch too short for your application. After cutting the wanted length we will start building our patch cable by shedding back about 1 inch of the jacket

After striping makes sure that the depth of your stripper is set deep enough to cut the jacket but not so deep that it nicks the conductors of the cable. If you do groove the conductors while shedding the cable, the cable may work fine at first, but after some time may be the conductors will break.
                  

 Now we have the shielded jacket we'll want to separate and bend the pairs. We'll start by pushing the first pair and the last pair to their other sides (Orange to the left side and Brown to the right side). Untwist these pairs of cat5e/cat6 plenum cable any further than you've shielded the jacket. Now we'll split the green pair. Pull the white/green conductors to the opposite sides. And the blue pair in the middle.  Untwist the blue and white/blue conductor in against sides.

Note: Usually, it would be unmentionable to untwist the Cat5e/Cat6 pairs, not including when building patch cables. It would be almost unmanageable to pull out the conductors into the correct connector locations deprived of untwisting.

 

Now that we've parted and straightened the pairs we want to place the conductors in the suitable order according to which cabling standard you are spending. For this case, we will be cabling via the 568-B normal (most common in patch cables). Consult the pin-out for the correct color codes. After you have the wires settled, place them strongly together as shown in the picture. Once this is done, confirm that the cables are still in the accurate order and continue to next step. 

Now we need to slim the electrodes down to fit into the RJ45 connector. While adornment, make sure you make a nice clean cut at a 90-grade angle around 1/2 of an inch from the end of the cover. If you fail to make a cut, some of the electrodes may not reach the connector associates. If you cut the electrodes too small, again they will not make communication. If you leave the electrodes too long, when crinkling the connector, the covering will not be spellbound leaving the rinsing on the electrodes. This is not a good condition! For proper garnish, hold the wires securely just at the end of the cover as shown in the picture. Be assured to keep the electrodes in the right order.
                 

Our Cat5e patch cable is almost done. Although still holding the cable definitely, we now want to place the rods into their right location in the RJ45 Cat5e/cat6 Linked Connector.  Hold the RJ45 linked plug with the links facing up and prudently pullout the conductors in their correct locations. Apply a modest quantity of force in order to correctly seat the cables against the links in the connector. When the cables have been correctly put into the RJ45 linked connector, detect the tip. As shown in the picture to the left you must be able to see the end of each electrode, representative that the rods were fully injected. Also, take the remainder of the colors. All white conductors should be on the top and all the colored conductors on the bottom. 

Many customers have testified that they find Cat5e/cat6 Connectors with load bars much relaxed to use during the close process. The load bar is used to bring into line the conductors into the proper place and hold them in place during addition.

Sensibly insert the get-together which you have just completed into a linked crumpling tool, taking care to confirm the conductors stay fully injected. When crumpling the connector, use the full stroke of the crumple tool so that the contacts correctly "bite" into the rods.  After you have finalized the crimp, take time to see at the connector and confirm all the pins were crumpled and that they made good contact with the rods. 

If you are structuring a straight through Cat5e/cat6 patch cable, terminate the opposed end by recapping this process from the first step. If this will be a cat 5/ cat6 cusp cables, return the first step and continue; however, terminate the second end of the cable using the cabling system that you didn’t use for the first end.  Terminating one finish with 568-B and the second one with 568-A makes a crossover wire. If it is a straight through wire you are making, simply use the same cabling arrangement for both ends. 

That's it!  Use a sample to test for steadiness and your DIY Cat5/Cat6 patch cable is completed.

Note: If the cat6/cat5e plenum cable does not test positive for continuity cut the connector off and start over, or buy one of our pre-made or custom length patch cords.
Visit Our Website Now.

Regards
Jason Holder43333 
Osgood Road Fremont, CA 94539, USA
PH: +1(408) 414-7437
http://www.Westcables.com/

1000FT Cat6 Plenum Bare Copper Ethernet UL Cable

1000ft Bulk category 6/ Cat6 Plenum Bare copper CMP Ethernet UL cable, 4-pair UTP (Unshielded Twisted Pair) up to 550 MHz, Cat6 Solid Plenum CMP is fire safety cable, which is safe for use within indoor and outdoor and commercial buildings Cat6 cables are made of the solid conductor and for longer cable runs. It has with enhanced performance, bandwidth, audio/video, broadband and Solid Cat6 plenum Network Wire is Ideal for security capabilities and ideal for network installation for business and home use and also for network adapters, hubs, switches, routers, DSL/Modem other high-performance networking applications where plenum cables are required.
Visit Now.

Uses:

Ideal for 10Base-T (IEEE 802.3), 100Base-TX (IEEE 802.3u), 1000Base-TX, 100 Vg-Any LAN (IEEE 802.12), Token Ring (IEEE 802.5), TP-PMD (ANSI X3T9.5), 350 Mbps CDDI, ATM 155, and all proposed category 6 requirements for high-speed, full duplex, parallel transmission protocols.

Features:

• Length: 305 M
• UL Certified
• Used in the place of CMP, CMR, CMG, CM and CMX cables
• 23 AWG (American Wire Gauge)
• 4 pair UTP (Unshielded Twisted Pair)
• Solid pure Conductors
• Up to 550MHz
• RoHS Compliant
• Low Smoke
• Reel Packing
• UPC : 4861823170181
• Available in Blue and White

1000FT Cat6 Riser Solid Copper UTP Ethernet Cable

1000ft Bulk category 6/ Cat6 Riser Bare copper CMR Ethernet cable, 4-pair UTP (Unshielded Twisted Pair) Tested to 550 MHz, Cat6 cables are made of solid conductor and for longer cable runs, It has with enhanced performance, bandwidth, audio/video, broadband and Solid Cat6 riser Cable is Ideal for security capabilities and ideal for network installation for business and home use and also for network adapters, hubs, switches, routers, DSL/Modem other high-performance networking applications where plenum cables are required.
Shop Now.

Uses:

Ideal for 10Base-T (IEEE 802.3), 100Base-TX (IEEE 802.3u), 1000Base-TX, 100 Vg-Any LAN (IEEE 802.12), Token Ring (IEEE 802.5), TP-PMD (ANSI X3T9.5), 350 Mbps CDDI, ATM 155, and all proposed category 6 requirements for high-speed, full duplex, parallel transmission protocols.

Features:

• Length: 305 M
• 23 AWG (American Wire Gauge)
• 4 pair UTP (Unshielded Twisted Pair)
• Solid Bare Copper
• Up to 550MHz
• RoHS Compliant
• Low Smoke
• Easy Pull Box
• Available in Blue and White

Bulk Cat6 Plenum 1000FT Solid Copper Networking Cable

Buy Category 6 / Bulk Cat6 plenum solid copper UTP Ethernet networking cable of advanced quality. Cat6 plenum cable 1000 FT consisted of 23-AWG solid copper conductors which support up to 550MHz data transfer, designed especially for longer cable runs. Cat6 CMP Plenum rated cable considered to be a perfect choice indoor/outdoor networking needs.
Shop Now

Features:

Length = 1000FT

4 pairs Unshielded Twisted Pair (UTP)

23 AWG (American wire gauge)

100% Solid Copper Conductor

Low smoke Plenum rated jacket

Reel in box

Available in White, Blue and Grey colors

1000FT Cat6 Plenum CMP Solid Ethernet Bulk Network Cable

WESTCables is offering advanced quality Cat6 Plenum CMP Ethernet network cable at the discounted rate. Cat6 Plenum cable 1000 FT is tested up to 550 MHz and is considered to be the perfect choice for your networking needs. Cat 6 plenum 1000FT supports speed up to 10 gigabytes and plenum rated jacket which is usually low smoke and can survive in intense temperature so it is considered to be the perfect choice for your networking needs.
Shop Now.

Uses:

Ideal for 10Base-T (IEEE 802.3), 100Base-TX (IEEE 802.3u), 1000Base-TX, 100 Vg-Any LAN (IEEE 802.12), Token Ring (IEEE 802.5), TP-PMD (ANSI X3T9.5), 350 Mbps CDDI, ATM 155, and all proposed category 6 requirements for high-speed, full duplex, parallel transmission protocols.

Features:

• Length: 1000FT
• 23 AWG
• Supports up to 550 MHz
• Plenum Rated Jacket
• 4 Pairs UTP (Unshielded Twisted Pair)
• Solid CCA Conductors
• Reel in Box
• Available in 5 colors

1000FT Cat6 Plenum CMP Ethernet UTP Bulk Cable

Buy high-quality Bulk 1000ft Category6 or Cat6 Plenum CMP UTP “Unshielded Twisted Pair” Ethernet Cable with enhanced voice. Cat6 Plenum Ethernet networking cable comes with enhanced performance, bandwidth, Audio/Video, broadband and in Reel packing for smooth and easy installation. This cable is perfect for use at home and in office also, can be used in indoor/outdoor applications.
For More Information Visit Our Website.

Uses:

Ideal for 10Base-T (IEEE 802.3), 100Base-TX (IEEE 802.3u), 1000Base-TX, 100 Vg-Any LAN (IEEE 802.12), Token Ring (IEEE 802.5), TP-PMD (ANSI X3T9.5), 350 Mbps CDDI, ATM 155, and all proposed category 6 requirements for high-speed, full duplex, parallel transmission protocols.

Features:

• UPC: 4861823172086
• Length: 305 M
• Used in the place of CMP, CMR, CMG, CM and CMX cables
• 23 AWG (American Wire Gauge) Copper Clad Aluminum
• 4 pair UTP (Unshielded Twisted Pair)
• Up-to to 550MHz
• RoHS Compliant
• Plenum Rated Jacket
• Reel Packing
• Available in Blue, White, Red, Yellow, and Grey

1000FT Cat6 Plenum Bare Copper UTP Ethernet Cable

1000ft Bulk category 6/ Cat6 Plenum Bare copper CMP Ethernet cable, 4-pair UTP (Unshielded Twisted Pair) up to 550 MHz, Cat6 Solid Plenum CMP is fire safety cable, which is safe for use within indoor and outdoor and commercial buildings Cat6 cables are made of the solid conductor and for longer cable runs. It has with enhanced performance, bandwidth, audio/video, broadband and Solid Cat6 plenum Network Wire is Ideal for security capabilities and ideal for network installation for business and home use and also for network adapters, hubs, switches, routers, DSL/Modem other high-performance networking applications where plenum cables are required.
For More Information Visit Our Website.

Uses:

Ideal for 10Base-T (IEEE 802.3), 100Base-TX (IEEE 802.3u), 1000Base-TX, 100 Vg-Any LAN (IEEE 802.12), Token Ring (IEEE 802.5), TP-PMD (ANSI X3T9.5), 350 Mbps CDDI, ATM 155, and all proposed category 6 requirements for high-speed, full duplex, parallel transmission protocols.

Features:

• UPC: 4861823172093
• Length: 1000ft
• Used in the place of CMP, CMR, CMG, CM and CMX cables
• 23 AWG (American Wire Gauge)
• 4 pair UTP (Unshielded Twisted Pair)
• Solid pure Conductors
• Up to 550MHz
• RoHS Compliant
• Low Smoke
• Reel Packing
• Available in Blue, Grey and White

1000FT Cat6 Plenum Bare Copper UTP Ethernet Cable

1000ft Bulk category 6/ Cat6 Plenum Bare copper CMP Ethernet cable, 4-pair UTP (Unshielded Twisted Pair) up to 550 MHz, Cat6 Solid Plenum CMP is fire safety cable, which is safe for use within indoor and outdoor and commercial buildings Cat6 cables are made of the solid conductor and for longer cable runs. It has with enhanced performance, bandwidth, audio/video, broadband and Solid Cat6 plenum Network Wire is Ideal for security capabilities and ideal for network installation for business and home use and also for network adapters, hubs, switches, routers, DSL/Modem other high-performance networking applications where plenum cables are required.

For More Information Visit Our Website.

Uses:

Ideal for 10Base-T (IEEE 802.3), 100Base-TX (IEEE 802.3u), 1000Base-TX, 100 Vg-Any LAN (IEEE 802.12), Token Ring (IEEE 802.5), TP-PMD (ANSI X3T9.5), 350 Mbps CDDI, ATM 155, and all proposed category 6 requirements for high-speed, full duplex, parallel transmission protocols.

Features:

• UPC: 4861823172093
• Length: 1000ft
• Used in the place of CMP, CMR, CMG, CM and CMX cables
• 23 AWG (American Wire Gauge)
• 4 pair UTP (Unshielded Twisted Pair)
• Solid pure Conductors
• Up to 550MHz
• RoHS Compliant
• Low Smoke
• Reel Packing
• Available in Blue, Grey, and White